I am back from a trip to Radio Shack. I picked up a 12VDC Auto Relay SPST 30/40A, a spst mini toggle siwtch(10A at 126 VAC), and a IRF510 MOSFET transistor n-channel 60 volt).
I taped them all to a piece of paper to work out what I have to solder to what and of course I am troubled.
The first thing is the capacitor I had purchased indicates that it is a non-polarized capacitor while the diagram indicates a polarized one. I noticed the little plus sign.
I took a few pictures:
Shown is the trigger switch and the on off switch.
![007-2.jpg](./download/file.php?id=1547&sid=96e3a2d028e08af2dc605d5b532e9e3b)
- 007-2.jpg (5.03 KiB) Viewed 93718 times
This shows the resistors, capacitor, and the transistor. I think my hook up of the transistor is wrong!
![008-2.jpg](./download/file.php?id=1548&sid=96e3a2d028e08af2dc605d5b532e9e3b)
- 008-2.jpg (4 KiB) Viewed 93718 times
This shows the diode and the auto relay. Wires will go to terminals 30 and 47
![011-2.jpg](./download/file.php?id=1549&sid=96e3a2d028e08af2dc605d5b532e9e3b)
- 011-2.jpg (4.24 KiB) Viewed 93718 times