circuit to reverse motor direction, 24v

[H73iiPz]

If I am understanding you correctly the diodes going across the coils would go across pins 7&8 which plug into sockets A&B? The relay is totally enclosed. Also, I am assuming as the schamatic shows that the cathode is on the +24V side?

[pebe]

I cannot identify the relay. Can you give me a link that shows the connections?

Yes,the cathode goes to +24V.

[H73iiPz]

Here you go. R14 - 5A15 - 24 Diagram D10

http://www.nteinc.com/relay_web/pdf/R14.pdf

[pebe]

OK.
7 & 8 are the coil connections, 6 is the common that connects to the motor, 2 is the 'normally closed' contact that goes to 0V, and 3 is the 'normally open' contact that goes to +24V.

[H73iiPz]

Thanks,
Have got it wired and just wanted to check theTR1 And TR2 connections. Your directions, "(from he top) C,B,E." To clarify, Is C connected to the diode/coil, B between 6K8 and 2K2, E to 0V??

[pebe]

Yes, that's correct.