Idiot light circuit help

[CrAzY_DrIveR]

Hi, i really like electronics but i don't understand anything about it so i need some help

My car had a idiot light for the oil pressure that switches off ground to the light when there is oil pressure and everything is ok, so when the engine is off the switch was on and so was the light as it normally should be.

My new engine has an inverted system that switches on ground when there is oil pressure.

So i need to turn off the light when ground is applied and turn on the light when ground is not present.

I found this circuit but i use a simulator (http://www.falstad.com/circuit/) it shows I=1.34A
is this normal?

http://home.comcast.net/~loudgpz/GPZ...reWarning.html

Is it possible to make a more simple circuit that does't use so much power?

[pebe]

Your link does not work.

[CrAzY_DrIveR]

sorry about that, i used a relay as transistors are too complicated for me.
now i have another problem so i'll open a new topic lol

[img]http://home.comcast.net/~loudgpz/GPZweb/OilPressLight.gif[/img]

[pebe]

The circuit is OK. You say you have 'another problem'. Is it the same question as your first post?