HOBART HANDLER 135 CONTROL BOARD 195886 UPGRADED KIT WITH RESET INSTRUCTIONS for Sale

Recent Threads

On eBay Now...

HOBART HANDLER 135 CONTROL BOARD 195886 UPGRADED KIT WITH RESET INSTRUCTIONS For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

HOBART HANDLER 135 CONTROL BOARD 195886 UPGRADED KIT WITH RESET INSTRUCTIONS:
$28.99

PLEASE DO NOT COPY THIS KIT AS m-tronicz HAS INVESTED A LOT OF TIME AND EFFORT IN COMPILING THE KIT
We highly recommend matching your part number.We recommend matching the part number on your original part with the part number listed on this page to ensure compatibility.Part number can be found on a white sticker attached to the board.
This Repair Kit is directed to people with basic to medium knowledge in electronics and tools such as a soldering iron, solder wick, and solder. ( If you want to know more about electronics installation you can search and watch youtube videos)
All parts are brand new and some may be upgraded from the OEM versions.We do not provide component locations map, schematics* or any kind of support.(*Companies rarely make them available to the public, this makes fault finding very difficult and repairs a bit hit and miss!)Simple questions can be sent through the messenger.All parts should be fairly easy to identify on your board.You must be able to read component markings on your board to identify the components and take note of the correctorientation of the original parts on your board to install them correctly.The technician installing the parts is responsible for ordering the correct parts and installingthe parts correctly. Installation of parts will require the ability to readthe markings on your power supply board to locate the correct components to repair and install them correctly.Improper handling could cause further damage to your board.If you are not confident in your skills please hire a professional to perform the repairs.
REPAIR TIME:Should take under an hour.M-tronicz is offering this repair kit for a common failure in HOBART HANDLER 135 CONTROL BOARD# 195886
"Feed motor running full speed , slow motor or not running at all.The feed motor will cool and then it will run again for about 15 same parts in our Repair Services.You will receive parts from the same pool that our technician on site use.Many of these are recommended replacements on the official Service Manual to correct factory installed parts.M-tronicz recommends to replace all new parts at the same time even if the ones in your board may look ok.***********************Please be sure to match this number with your board # 195886There are a lot of identical boards out there and one different number or revision will change everything.A different revision # on a pcb can mean the difference between your set working and not working.
If you ordered the wrong part or ordered by mistake send me a message and I will handle the return process internally.Just wait for the return form sent via messages.I will deduct return shipping from the return process. It is your responsibility to make sure you order the correct part.I pay for shipping to you but if you order the wrong part and want a refund I deduct the price of return sure to check out my other items for not all of the boards fail in the same way, we do not guarantee that the components in this kitis all you need to fix your board but it can take care 90% off all cases.It's your responsibility to troubleshoot and properly diagnose your board in order to complete the repair.It is important to note that the above described behavior can be caused by a number of very differentfailures and not all of them could be related to this repair kit !We recommend all kits fitted by a qualified personnel.A successful repair depends on the own skill and fault finding ability.This service kit is intended for use by persons having electrical, electronicand mechanical experience and knowledge at level generally consideredacceptable in the consumer electronics and appliance repair trade.DOING YOUR OWN REPAIR WORK: The removal and replacement/installation of electronic componentsat the circuit board level is NOT recommended if you are not experienced with electroniccomponent and circuit board repair. If you are new to this stuff, please take our adviceand leave the work to a qualified expert- you will most likely thank yourself later.It is VERY easy to cause damage to electrical parts and circuit boardsif repairs are not done with precision, neatness, and accuracy. It is very easy forone to make problems WORSE than they were before, if one does not know what one is doing,or does not have adequate experience with these kinds of parts and this kind of work in general.