52cc Gas Gasoline Demolition Jack Hammer Concrete Breaker Punch Drill Jackhammer for Sale

Recent Threads

On eBay Now...

52cc Gas Gasoline Demolition Jack Hammer Concrete Breaker Punch Drill Jackhammer For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

52cc Gas Gasoline Demolition Jack Hammer Concrete Breaker Punch Drill Jackhammer:
$269.05

Specification Material: Steel, PPSurface Treatment: PaintingModel: 125AEngine Type: 44*34mm/17.32*13.39inch Air-Cooled Single-Cylinder Two-StrokeFuel: Mixed OilRatio: 25: 1(92#Gasoline: Motor 52ccFuel Consumption Rate: ≤0.6L/h /25.36oz/hImpact Energy: 20-55JImpact Times: 1500bpm Max. Power And Speed:1.9kw/6500r/minMax. Torque And Speed:3.5Nm/5000r/minColor: Black+RedStyle: ModernPower Source: Gasoline PoweredStarter System: Hand Pull StartCarburetor Type: H119-6A-00-210Spark Plug Type: BM6ANumber of Items: 1Number of Chisels: 2Assembly Required: YesMount Type: Floor StandingProduct Size: 40*27*95cm/15.75*10.62*37.4inchChisel Type: Pin Card Type (Without Thread) 28*400mm (1.1*15.75inch)

52cc Gas Gasoline Demolition Jack Hammer Concrete Breaker Punch Drill Jackhammer

Description

Good tools are indispensable for the complicated work of breaking up concrete and block. Made of high-quality steel and PP, and adopting a painting process, this item lays a foundation for your long-term use. 1900W power, 52cc two-stroke engine, and 6500 r/min speed can greatly improve your efficiency. With it, you can completely say goodbye to the traditional breaking method and work more Steel, PP

Surface Treatment: Painting

Model: 125A

Engine Type: 44*34mm/17.32*13.39inch Air-Cooled Single-Cylinder Two-Stroke

Fuel: Mixed Oil

Ratio: 25: 1(92#Gasoline: Motor 52cc

Fuel Consumption Rate: ≤0.6L/h /25.36oz/h

Impact Energy: 20-55J

Impact Times: 1500bpm

Max. PowerAnd Speed:1.9kw/6500r/min

Max. TorqueAnd Speed:3.5Nm/5000r/min

Color: Black+Red

Style: Modern

Power Source:GasolinePowered

Starter System: Hand Pull Start

Carburetor Type: H119-6A-00-210

Spark Plug Type: BM6A

Number of Items: 1

Number of Chisels: 2

Assembly Required: Yes

Mount Type: Floor Standing

Product Size: Type: Pin Card Type (Without Thread) 28*400mm Included

1*Demolition Jack Hammer

1*Pointed Chisel

1*Flat Chisel

1*Tool Kit Set

1*Oil feeder

1*English Manual

Key Features

Bulid to Last: High-quality steel and PP, and painting process make this product solid, wear-resistant, impact-resistant, and rustproof, so it can keep beautiful and practical without frequent replacement.

High Efficiency:The 52cc 2-stroke engine, 1900W power, 6500r/min speed, and 3.5Nm torque provide impact energy of up to 20-55J and impact times of 1500bpm, so it can efficiently help you do various heavy-duty works.

Good Heat Dissipation: The air cooling model and multiple cooling holes on the body can timely reduce the temperature of the product in the process of operation, and avoid potential safety hazards, thus extending the product\'s service life.

Sturdy & Reliability:It features a commercial grade unit, toughened crankshaft, ball bearing construction, accurate thumb throttle control, and a high tensile gear set, so this item can realize maximum reliability.

Large Capacity:1.3L/54.95oz oil tank avoids frequent refueling and improves working efficiency.

Save Money:The high-quality carburetor makes thegasolinefully burn when driving, and the fuel consumption is less than 0.6L/25.36oz/h, so your cost can be saved.

Elaborate Design: This product is mainly powered by gasolinewithout wire limitation, which provides more convenience for you to use outdoors.

Simple Installation and Use: The simple structure, detailed manual, ergonomic, anti-slip,and shock-absorbing double handles, starting device, and complete accessories ensure that you can complete the installation and start using it in a short time.

Complete Kit:The combination of an oil feeder, two chisels, an installation kit, etc. provides more convenience for you to use, and you do not need to buy extra.

EffortlessCleaning: The smooth surface allows you to easily remove dust and residues with a towel and water.

Details

Round Corners:Compared with traditional square corners, an arc design can better care for your skin.

Two Chisels: Two chisels of different shapes allow wider application, and it is also convenient for you to replace.

OilFiller:The filler with a large opening is convenient for you to add oil in time.

Application

This product is suitable for on-site work without a power supply or under wet conditions, such as foundation removal, lane removal, reinforced concrete floor or wall removal, penetrating hard rock, asphalt removal, trenching operation, driving grounding rod, farmland fence, and highway guardrail piling, etc. It is also suitable for the compaction of loose material if suitable parts are connected.

After each use, please check the tightness of the screws in oil filler.

Please use butter and add it to the oil eye. After 20 hours of use, please add 30-50g of butter.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer\'s responsibility.Delivery detailsShipping:2-9 working days to: USATerms of sales

We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!

About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions.Item locationCA /NJ /AustellMPNDoes Not ApplyBrandUnbrandedTypeDemolition Concrete Jack Hammer Inch）Carburetor oil (25 gasoline: 1 motor oil)Max impact20-55JFuel Tank Capacity1.3L/54.95ozMax torque and speed:3.5Nm/5000r/minFuel Consumption Rate:≤ 0.6L/hImpact Frequency:1500bpmStarter systemHand pull startSpark plug type:BM6AChisel TypePin card type (without thread) 28*400mm (1.1*15.75inch)Max power and speed:1.9kw/6500r/minCountry/Region of ManufactureCHINAPower Sourcen/a

On Jul 1, 2024 at 23:17:05 PDT, seller added the following information: