On eBay Now...

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:
- For automotive, marine, boats, and much more applications
- Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant
- 12V DC, 50A, SPST (single pole, single throw)
- Contacts are pure copper for long life
- Screw terminals are brass, nickel plated
- Recommended mounting hole: 0.625" (5/8")
- Maximum panel thickness: 0.500" (1/2") without boot; 0.312" (5/16") with boot
- CAUTION: Disconnect negative battery cable before installation
- Life: = >10000 Times Presses (Factory Tested. Minimum press test > 10000 times)
Feature:
Brand new and high quanlity.
Push-to-make = SPST Momentary
A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch.
Material: Diecast Aluminum & Plastic
Length: 6.2cm
Width: 2.8cm
Color: Black
Voltage: 12V
Push button momentary switch Includes Black Neoprene Cap for Extra Protection Against Dirt and Moisture.
Brand new and high quanlity.
Push-to-make = SPST Momentary.
A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch.
Horn push button starter switch are made of high quality,weatherproof rubber cover, prevents dirt, dust and moisture from getting in.
Car horn button switch Length is 2.44 inch,width is 1.1 inch engine starter switch mount in 5/8 inch drill hole and 0.63 inch threaded parts.
Push start button apply to most 12 volt / 24 volt vehicles with 20A current,its normally open (off) position when you release the button,shown by the brackets around ON.It's the standard horn/ignition type switch.
Push button starter switch includes Flush Terminal Screws.Strict quality control and full inspection are taken before shipment to assure you for top quality push switch.
NOTE:
It is manual measurement, there may be 2-5mm error. And item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same, hope understand.
Packaging included:
1x Start Button
FAQ:
Where is my item?
All items are shipped out within same business days after full payment has been cleared. An automated email will be sent containing the tracking number.
The tracking number does not update
The automated email from system means your order has been processed but does not mean it has been shipped out. It may take up to 24 hours for the system to update.
I purchased by mistake, how do I cancel the order?
Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.
I received your item but it does not fit or is defective
Please contact us so we can assist you on the matter.
I tried to contact you, but cannot reach anyone.
Our officer hours are 9:30AM - 5:30PM PST Monday - Friday. Emails are the best way to contact us and should receive a response within 24 hours.
Certificates of our product:
Our Factory:
Description:
- For automotive, marine, boats, and much more applications
- Heavy Duty (50 amps) push-button momentary switch that is dust and moisture resistant
- 12V DC, 50A, SPST (single pole, single throw)
- Contacts are pure copper for long life
- Screw terminals are brass, nickel plated
- Recommended mounting hole: 0.625" (5/8")
- Maximum panel thickness: 0.500" (1/2") without boot; 0.312" (5/16") with boot
- CAUTION: Disconnect negative battery cable before installation
- Life: = >10000 Times Presses (Factory Tested. Minimum press test > 10000 times)
Feature:
Brand new and high quanlity.
Push-to-make = SPST Momentary
A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch.
Material: Diecast Aluminum & Plastic
Length: 6.2cm
Width: 2.8cm
Color: Black
Voltage: 12V
Push button momentary switch Includes Black Neoprene Cap for Extra Protection Against Dirt and Moisture.
Brand new and high quanlity.
Push-to-make = SPST Momentary.
A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch.
Horn push button starter switch are made of high quality,weatherproof rubber cover, prevents dirt, dust and moisture from getting in.
Car horn button switch Length is 2.44 inch,width is 1.1 inch engine starter switch mount in 5/8 inch drill hole and 0.63 inch threaded parts.
Push start button apply to most 12 volt / 24 volt vehicles with 20A current,its normally open (off) position when you release the button,shown by the brackets around ON.It's the standard horn/ignition type switch.
Push button starter switch includes Flush Terminal Screws.Strict quality control and full inspection are taken before shipment to assure you for top quality push switch.
NOTE:
It is manual measurement, there may be 2-5mm error. And item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same, hope understand.
Packaging included:
1x Start Button
FAQ:
Where is my item?
All items are shipped out within same business days after full payment has been cleared. An automated email will be sent containing the tracking number.
The tracking number does not update
The automated email from system means your order has been processed but does not mean it has been shipped out. It may take up to 24 hours for the system to update.
I purchased by mistake, how do I cancel the order?
Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.
I received your item but it does not fit or is defective
Please contact us so we can assist you on the matter.
I tried to contact you, but cannot reach anyone.
Our officer hours are 9:30AM - 5:30PM PST Monday - Friday. Emails are the best way to contact us and should receive a response within 24 hours.
Certificates of our product:
Our Factory:
Item SpecificsBrand :CarBoleLength :6.1cmWidth :2.8cmManufacturer Warranty :LifetimeTo Control :Engine Kill, Standard Horn, Ignition Type SwitchType :Push ButtonPlacement on Vehicle :Center Console, Front, Rear,Left, RightFeatures :Waterproof, Anti-dust, Easy installationButton Color :Black & SilverContact Material :Metal & Plastic & RubberOperation Method :On/OffPush-to-make :SPST MomentaryColor :Black & SilverSwitch Action :MomentaryTerminal type :SPSTFuse Type :SwitchTermination Type :PowerCurrent Type :AC/DCFinish :ChromeSwitch Style :Push Button/RetractiveSmart Home Compatibility :UniversalSuitable For :Exterior, InteriorModel :Push Button StarterFitment :For automotive and marine applicationsCAUTION :Disconnect negative battery cable before installationAll rights reserved.

Heavy-Duty Push Button Switch Momentary Push On 50 AMP 12V 24V Ignition Starter
$6.99
Bradley Aerix 2904-28 Heavy-Duty Push Button Commercial Hand Dryer
$199.99
Heavy Duty Push Cart With Detachable Rear Guardrail, Heavy Duty Platform Truck
$136.91
![]()
Popular Tutorials
Alarms and Indicator Circuit diagrams