M2.5x20 Viton O-Ring, 75A Durometer, Round, Black, Viton, 20 mm ID, 25 mm OD, 2. for Sale

Recent Threads

On eBay Now...

M2.5x20 Viton O-Ring, 75A Durometer, Round, Black, Viton, 20 mm ID, 25 mm OD, 2. For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

M2.5x20 Viton O-Ring, 75A Durometer, Round, Black, Viton, 20 mm ID, 25 mm OD, 2.:
$21.74

M2.5x20 Viton O-Ring, 75A Durometer, Round, Black, Viton, 20 mm ID, 25 mm OD, 2.5 mm WidthPackaging May Vary

Made of Viton (fluorocarbon elastomer) for use with a variety of chemicals and fuels
Durometer (hardness) of 75A
Round cross-section provides a seal between cylindrical overlapping surfaces
For use across a wide temperature range from -15 degrees F (-26 degrees C) to 450 degrees F (232 degrees C)

This metric O-ring is made of black Viton and has a durometer of 75A, a round cross-section, and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing applications. Viton (fluorocarbon elastomer) has heat, fuel, and chemical resistance and is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichloroethylene), aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane). It works well in high vacuum environments and is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. The durometer hardness of this Viton O-ring is 75A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for rubber while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required inside diameter (ID), outside diameter (OD), and cross-sectional (CS) diameter.

Our Terms & Policies 💳 Payments

We only accept payment methods that offers at checkout, we cannot accept any other form of payment

Payment is required immediately at checkout

🔄 Returns

All sales are final — we do not accept returns or exchanges, unless the return policy shown on this listing states otherwise.

If your item arrives damaged, defective, or not as described, please contact us through direct messages within 3 days of delivery and we will make it right. Such cases are covered under the Money Back Guarantee.

🚚 Shipping

Order processing typically takes between 1 and 4 business days. Please note that we do not typically ship on weekends or public holidays.

During seasons of high demand (holidays), there may be slight delays in processing and shipping times. We recommend allowing extra time for your package to arrive. Should your order experience a significant delay, we will reach out to you through s direct messaging system

We offer FREE shipping on all orders