MUFASHA Non-Contact Voltage Detector Electrical Pen AC Voltage Tester Smart Brea for Sale

Recent Threads

On eBay Now...

MUFASHA Non-Contact Voltage Detector Electrical Pen AC Voltage Tester Smart Brea For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

MUFASHA Non-Contact Voltage Detector Electrical Pen AC Voltage Tester Smart Brea:
$11.89

SPECIFICATIONS

Battery Included: n

DIY Supplies: Electrical

High-concerned chemical: none

Origin: Mainland China

Power Source: Battery

Power Supply: Battery

Semi-finishedproduct: No

Voltage range: 12/48-1000V AC

power: 1.5V AAA*2

Install the battery (1.5V AAA) according to the display on the machine, and press and hold the power button for more than 2 seconds to turn it on.

The principle of a non-contact voltage tester detecting AC is based on sensing the magnetic induction voltage around AC. It's the physical phenomenon where electricity generates magnetism and magnetism generates electricity. So it basically follows some natural rules. For example, when detecting a live wire, the closer you are, the higher the frequency of the alarm; the farther away, the alarm gets lower in frequency or might even disappear. The alarm strength decreases with distance. But don’t worry, the tester never needs to touch the wire directly to detect the induced voltage around AC. It’s worth noting that with this principle, DC can’t be detected, because there’s no induced voltage around DC.

Check if there are any breaks in the AC power wires, such as the data cable plugged into an AC outlet. Also, check if there's any AC voltage higher than 12V around the AC power wires.
Confirm the live wire, neutral wire, and ground wire. The live wire triggers a high-frequency alarm. The neutral wire will trigger a low-frequency alarm when it gets close to the live wire. In principle, the live wire alone doesn’t trigger an alarm, and the ground wire works the same way.

Please use 1.5V AAA batteries as specified. There are lithium batteries of the same size on the market, but they are not compatible with this machine. The output voltage of those lithium batteries exceeds the specified voltage.

product information

This product can detect whether wires are charged (alternating current), and is suitable for home circuit maintenance and production electricity detection.