
On eBay Now...
Rectangular Electromagnet Liting Holding Magnet DC 12V 24V Solenoid 4Kg-800kg For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Rectangular Electromagnet Liting Holding Magnet DC 12V 24V Solenoid 4Kg-800kg:
$38.18
The electromagnet can reach its maximum suction force only when the following conditions are met during operation:
- The effective adsorption gap is 0 mm (must be attached closely). No objects may be placed in between.
- The surface of the workpiece to be adsorbed shall be flat and clean.
- The contact area of the workpiece shall be greater than or equal to the suction surface of the electromagnetic chuck (the maximum outer diameter of the chuck).
- The workpiece thickness shall be more than 8 mm to achieve the rated suction force. The suction force decreases as the thickness reduces.
- Use the correct power supply and rated voltage. Available voltages: DC12V / 24V.
- The workpiece must be material with good magnetic permeability, such as pure iron, low carbon steel, silicon steel sheet, etc.
- Avoid no-load suction during operation (no-load suction causes overheating). Moderate heat generation under normal adsorption is normal.
- This electromagnet is energized-to-magnetic and has no positive or negative polarity. By placing the order, you acknowledge and accept this note.
Thank you for browsing our products♥
On Oct 21, 2026 at 09:05:15 PDT, seller added the following information:

Rectangular Electromagnet Lifting Holding Magnet DC 12V 24V Solenoid 4Kg - 800kg
$108.79

US Stock 154LB 70kg Lifting Magnet Electromagnet Solenoid Lift Holding 59mm 12V
$27.04

Rectangular Electromagnet Liting Holding Magnet DC 12V 24V Solenoid 4Kg-800kg
$73.70